Serial Number Location

Click on the image to view a diagram indentifying the serial number location.

Part Enquiry


For parts enquiries, please use the form below
or call us on +61 (0) 3 5881 7477


 

Spare Parts

Before ordering spare parts it is important to identify your model so that you are sourcing the right parts from the start. Below, you will find instructions for identifying your serial number.

Identifying a Serial Number (Ploughs):

All machines Serial numbers are made up of their model number followed by their production number, only the production number is stamped into the top face of the most right hand pull mounting lug as shown on the drawing. This number is unique to each machine and can be traced back to know the exact machine from factory records.

The full serial number is the model number which is made up of the total number of discs not including the filler discs, followed by the original size disc fitted in diameter. After this the production number is added.

For example a 48 disc machine fitted with 26” discs with a production number 235, the serial number would be:-

4826235 (only the number 235 will be found stamped into the machine).

Identifying a Serial Number (Disc Bankers):

All machines Serial numbers are made up of their model number followed by their production number. The Serial Number is stamped into the front face of the frame to the right of centre. This number is unique to each machine and can be traced back to know the exact machine from factory records.

The full serial number is the model number which is made up of the number of discs on one side of the machine, followed by the maximum size disc fitted in diameter. After this the production number is added.

For example a 7 disc machine fitted with 32” discs with a production number 675, the serial number would be:-

732675 (this number will be found stamped into the machine).